lkpquest.blogg.se - Insydeh20 setup utility rev 5.0 advanced settings

INSYDEH20 SETUP UTILITY REV 5.0 ADVANCED SETTINGS INSTALL
INSYDEH20 SETUP UTILITY REV 5.0 ADVANCED SETTINGS SERIAL
INSYDEH20 SETUP UTILITY REV 5.0 ADVANCED SETTINGS UPDATE

When the process is complete, close all programs and applications and reboot the system.Insydeh20 secure flash. Perform the following steps to use the WinFlash Utility: Flash is complete when the message Flash programming complete displays. NOTE: If the AC power is not connected, the following message displays.Ĭ \iU!M\,lfVnB>fUsh jriashi( jutiBHza.fd /fi /B ✓beĥ. In flash BIOS, the message Please do not remove AC Power Source displays.

INSYDEH20 SETUP UTILITY REV 5.0 ADVANCED SETTINGS UPDATE

Execute the FLASH.BAT batch file to update BIOS.

Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move USB HDD to position 1.ģ.

Press F2 during boot to enter the Setup Menu.

Perform the following steps to use the DOS Flash Utility: The flash utility has auto-execution function.

Then boot the system from the bootable diskette.

Copy the flash utilities to the bootable diskette.

Fellow the steps below to run the Phlash. If the battery pack does not contain enough power to finish BIOS flash, you may not boot the system because the BIOS is not completely loaded. NOTE: Please use the AC adaptor power supply when you run the Phlash utility.

INSYDEH20 SETUP UTILITY REV 5.0 ADVANCED SETTINGS INSTALL

NOTE: Do not install memory-related drivers (XMS, EMS, DPMI) when you use the Phlash. NOTE: If you do not have a crisis recovery diskette at hand, then you should create a Crisis Recovery Diskette before you use the Phlash utility. Use the Phlash utility to update the system BIOS flash ROM.

Restore a BIOS when it becomes corrupted.

The BIOS flash memory update is required for the following conditions:

Load previous values from CMOS for all SETUP items. The table below describes the parameters in this screen.Įxit System Setup and save your changes to CMOS.Įxit utility without saving setup data to CMOS.

The Exit screen allows you to save or discard any changes you made and quit the BIOS Utility. Use or to select a device, then press to move it down the list, or to move it up the list. InsydeH20 Setup Utility Information Main Advanced Security Power Boot Exit Information Main Advanced Security Power Boot Exit Bootable devices includes the USB diskette drives, the onboard hard disk drive and the DVD drive in the module bay. This menu allows the user to decide the order of boot devices to load the operating system.

INSYDEH20 SETUP UTILITY REV 5.0 ADVANCED SETTINGS SERIAL

Thermal Trip Points Setting (Throttle On Temp.)Įnter the Platform Power Management menu.Įnable or Disable ACPI S1/S3 Sleep State.ĭisable or Enable wake up when the system power is off and a PCI Power Management Enable wake up event occurs.ĭisable or Enable wake up when the system power is off and a modem attached to the serial port is ringing.ĭisable or Enable auto wake up by date and time or at a fixed time everyday.ĭisable or Enable optional quick boot from S4 Resume.

Settings in boldface are the default and suggested parameter settings. The table below describes the parameters in this screen. The Power screen allows the user to configure CPU and power management options.ĪCPI S3: Wake on PME Wake on Modem Ring Auto wake on S5 Quickly S4 Resume